Hi
there, I am Sahas chitlange, aging 14, from India. here is my homemade
cheap and easy to build mini Biogas plant. It burns for approx. 20-30
mins on a bunsen burner. you can add anything from your kitchen waste (
Exept Onion peels and eggshells). In 12 hours the Gas is ready for use.
It is very easy and cost effective to build (only 2-3 dollars) and gives
many useful products.
the end products of this system are:
1) Methane : (Can be used as a fuel)
2) Slurry : (the spent slurry is exellent manure)
Related Post: The 100 Small Business Ideas You Can Start Today
The main components oof this system are:
1) Inlet pipe
2) digester tank
3) gas holder tank
4) slurry outlet pipe
5) gas outlet pipe
Pls leave a comment
the end products of this system are:
1) Methane : (Can be used as a fuel)
2) Slurry : (the spent slurry is exellent manure)
Related Post: The 100 Small Business Ideas You Can Start Today
The main components oof this system are:
1) Inlet pipe
2) digester tank
3) gas holder tank
4) slurry outlet pipe
5) gas outlet pipe
Pls leave a comment
Step 1: Chose the correct container
You will have to chose a correct size container which will act as a digester tank. My one is liters tank. I got it from scrap.
Step 2: Make holes
Make
holes in the tank for Inlet and outlet. For this I took a old iron rod
and heated it to make holes. CAUTION: rod is really very hot.
Related Post: 8 Steps On How To Start A Business
Related Post: 8 Steps On How To Start A Business
Step 3: Fix the inlet and outlet pipes
Glue the Inlet pipe and the Outlet pipe with any water proof adhesive.
Step 4: Making the Gas holder Tank
I
took a paint bucket of 20 lts for making a gas holder tank. this tank
holds the gas produced. The tank is overturned and fixed with a valve
used for plumbing purposes.
Step 5: Time to mix the cow dung !
mix the cow dung (5kg for 50 liters) and add water to make a fine slurry. Now put the slurry in the digester tank.
Step 6: Almost finished!
Put
the gas holder tank overturned in the digester tank after adding the
slurry . REMEMBER: open the valve while putting the gas holder tank. the
mini plant takes 10-15 days for the first time to get output. For the
first time, the gas in the tank wont burn as it contains Carbon Dioxide
gas, if fortunately it burns then good or wait for the second time. You
can detect how much gas is there in this system, the gas holder tank
will rises up as the gas is produced.
Related Post: Paint Production from The Comfort Of Your Home
Related Post: Paint Production from The Comfort Of Your Home
Step 7: Working photos
Related Post: How To Stop Unwanted Text Or Calls From Entering Your Phone
The photos of the system working are provided....... the heat is so much that it melts a thin sheet of tin in just 2 mins!!!! if you like this write up, please like, comment and Share ....
Thank you very much for this useful article. I like it. propane tank stabilizer
ReplyDelete